Defra Approved Back Boiler Stoves
There are a variety of factors to consider when choosing the right stove. The attraction of dual-functionality is only one of the many aspects to take into consideration.
DEFRA approved back boiler stoves offer the ideal solution to these problems. They produce very little smoke because they use the minimum amount of combustion air.
Clean Burn Technology
If you're in search of a clean burning stove with a big firebox that can be used to warm your home and provide hot water to your radiators, then a defra certified back boiler stove might be just what you are looking for. These stoves come with an integrated steel boiler capable of heating central heating systems while the fire is burning within the stove. This makes it an efficient method to make use of wood burners.
The majority of our defra-approved back boiler stoves come with a heated, airwash system to keep the glass doors free of soot and ash. They also have secondary combustion technology that works by reburning any unburnt particulates that were produced during the initial combustion. This keeps the flue gases clean which results in an efficient combustion process and lower fuel costs, saving you money on your energy costs.
Certain of our stoves have been independently tested and approved as Defra SE (Smoke Exempt). They do this by having an adjustment on the top air vent that stops you from shutting it all the way which will cut off the oxygen supply to the fire. This causes it to smolder instead of burning cleanly which results in more pollutants being released into the atmosphere.
Another important aspect is the moisture content of your fuel, which could be a major contributor to the amount of smoke emitted by an electric stove. visit the following internet site recommend burning only seasoned, dried wood with at least 20 percent to ensure your stove burns as cleanly and efficiently as possible. The majority of our approved Defra stoves are equipped with a moisture sensor, which can be adjusted to alter the amount of heat burned when burning wet wood.
Some manufacturers have gone one step further to increase efficiency by adding a secondary clean burn system. This is controlled by a chrome lever at the lower part of the stove. It opens and closes an air vent that draws the air over the fire, while reburning smoke created by the initial combustion process. This makes our Defra SE approved stoves even more efficient, so you can save even more on your energy costs.
Easy to Clean
A defra-approved back boiler stove lets you run both your central heating as well as hot water off the same system. This can be done by connecting a loop between other taps on the back-boiler (there usually are two) and your hot water tank. Then, you can utilize thermosyphoning to transfer heat into the home. This means that your boiler will never run out of hot water, as it will be fed by the tank.
To ensure that your stove is operating at its optimum level of performance you need to clean it frequently. To begin, ensure the stove is cool. Then, wipe down the body and doors of the stove with an uncluttered cloth. We recommend using a microfiber cloth, as they are less rough.
After wiping down the inside of your stove, it is recommended to clean the glass. Glass cleaners are readily available in a variety of hardware stores and will help remove stubborn marks and stains. It is recommended to use the glass cleaner in a limited amount, as too much can cause damage to the glass's surface.
Over time, the seals that surround your stove's doors and glass may begin to weaken. It is crucial to replace the seals every year to avoid gaps that could let heat escape. This can be done using stove rope, which is available in a majority of hardware stores.
If you own an Eco Design 2022-compliant back boiler on a defra-approved stove, the combustion process will be more efficient than traditional wood burning stoves. The latest technologies have made it possible to reduce the amount of combustibles released into the air. The stoves that comply with the regulations are more eco efficient and are also less expensive to operate.
Another thing to consider when using a back boiler stove is that it will always be a little more expensive than a typical multifuel stove because it produces more hot water than a normal multifuel stove. However, it's an economical method to heat your home, since you can power both central heating and hot water through the same source.
Easy to Install
Boiler stoves can be used to provide both heat for the area and hot water to your central heating system, which makes them a fashionable work horse that is an efficient and economical option. A wood burner that has back boiler is different from other multi-fuel stoves that need to be connected to gas boilers. It can be connected directly to central heating and hot water of your home, removing the need for a second heating system.
A wood burning stove with a back boiler can also be used to run your heating system entirely by renewable sources making them an eco-friendly choice than other stoves. Additionally, since they burn pellets and logs produce less emissions than gas or oil heating systems, which makes them an excellent choice for those concerned with the impact their energy usage is having on global warming.
While many people may be confused about how a wood burning stove with a back boiler functions, the process of installing one is relatively simple. The key is to ensure that the stove is properly installed and connected to your heating system, therefore it is best to have the installation done by a certified heating engineer. They can help you make sure that your stove has been properly installed and connected to the right systems, as well as making sure that all safety features are installed.
Defra Approved stoves or Defra Exempt Stoves, as they are sometimes referred to, have passed the Department of Environment, Food and Rural Affairs (DEFRA) standards for smoke emission levels. They can be used in Smoke Control Areas. They have been modified and tested to ensure they provide a very efficient burn and can be used with wood or smokeless fuels.
As as such, DEFRA approved stoves, such as the Defra Exempt Dunsley Yorkshire and our best selling Hi-Flame Aidan are able to provide a highly efficient burn with very low harmful emissions. They have been evaluated in accordance with the new Eco-Design regulations, which imposes limits on the amount particulate matter (PM), CO2, NOx and organic gases that a stove releases in normal operation.
Smoke Control Areas Suitable
The majority of UK cities and towns are classified as Smoke Control Areas and burning logs on older stoves or open flames can result in a fine for producing smoke emissions that are nuisance to the public. The good news is that Defra Approved back boiler stoves aren't subject to these restrictions if you select the correct appliance for your home.
Wood burners that are not subject to Defra are built with Clean Burn technology, which ensures that fuel is burnt efficiently and produces little smoke. This means that you can have a beautiful fireplace even if you live in a smoke-free area however, you'll need to limit the logs to approved mineral fuels that are smoke-free.
To comply with Defra requirements, these stoves feature airtight chambers for precisely controlled airflow. They usually use triple airflow systems to ensure that any combustion byproducts are able to be burned before they are able to escape the chimney. This is not just to stop any smoke from causing nuisance, but it also minimises soot build up which can block the flue and reduce gas efficiency.
It is crucial to purchase your Defra approved stove from an expert local Retailer who will ensure that the appropriate size of stove is selected for your home to ensure the highest efficiency in heating and that it is properly installed by an HETAS certified installer. They can also assist you to choose the best type of chimney liner to ensure a safe installation and provide advice on whether your house requires additional ventilation.
Modern DEFRA approved back boiler stoves are a world away from old open fires and traditional wood burners and you can expect a minimum of 75% efficiency in heating which will not only save you money but also reduces environmental impact. Additionally, Defra approved stoves can be employed in a smoke-controlled area, and require a minimum of 6mm stainless steel twin wall chimney liner, which is less expensive than the more expensive 12mm liners required for Ecodesign stoves.
If you are in any doubt about whether your property is in a smoke-free zone, contact your local council who can provide you with the latest information. Most reliable stove manufacturers have a Defra exempt section of their product line so that you can easily recognize these appliances when you shop.